ดูวิดีโอตอนนี้ Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:
SUPPORT ME ON PATREON at:
THIS IS MY FULL TIME JOB. Here are other ways that you can support me:
—
Watch all the videos in this series at:
—
0:00 – This is a different kind of tutorial
1:07 – Download and install BF configurator
Download BF configurator at:
How to install on MacOS:
2:43 – First-time configurator setup
3:33 – The serial port pulldown menu
If you are on MacOS, Linux, or Windows 10, you should NOT need to manually install the STM32 VCP driver. If you are on Windows prior to Windows 10, you need to install it.
STM32 VCP driver official web site download (requires registration and login):
Alternate download location (my personal OneDrive, not guaranteed to work):
6:58 – What is firmware flashing?
7:51 – Find the correct “target” for your FC
9:35 – Before you flash! Back up your config! ALWAYS!
10:33 – What is DFU mode?
Download ImpulseRC Driver Fixer from:
13:34 – How and why to flash “unstable releases”
15:08 – Apply Custom Defaults. Don’t skip this step!
16:50 – Introducing the Setup Tab
17:21 – Version number and Target Name
17:50 – Status icons
18:37 – Sensor indicators
20:00 – Dataflash chip status (no dataflash chip found?)
20:57 – Enable Expert Mode
21:13 – Update Firmware and Connect/Disconnect Button
21:29 – Port Utilization, Packet Errors, I2C Errors, Cycle Time, CPU Load
23:18 – Calibrate Accelerometer button
24:11 – Calibrate Magnetometer button
How to calibrate the Magnetometer:
24:58 – Reset Settings button (this is misleading)
26:38 – Heading, Pitch, and Roll indicator
28:10 – Reset Z Axis button
28:44 – Info section of Setup tab
30:48 – GPS, Instruments, and Experimental Backup and Restore
31:10 – Next, we’ll look at the Ports tab
“Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1 “, นำมาจากแหล่งที่มา: https://www.youtube.com/watch?v=LkBWRiEGKTI
แท็กของ Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1: #Betaflight #Install #Flash #Setup #Tab #COMPLETE #WALKTHROUGH #PART
บทความ Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1 มีเนื้อหาดังต่อไปนี้: Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST:
SUPPORT ME ON PATREON at:
THIS IS MY FULL TIME JOB. Here are other ways that you can support me:
—
Watch all the videos in this series at:
—
0:00 – This is a different kind of tutorial
1:07 – Download and install BF configurator
Download BF configurator at:
How to install on MacOS:
2:43 – First-time configurator setup
3:33 – The serial port pulldown menu
If you are on MacOS, Linux, or Windows 10, you should NOT need to manually install the STM32 VCP driver. If you are on Windows prior to Windows 10, you need to install it.
STM32 VCP driver official web site download (requires registration and login):
Alternate download location (my personal OneDrive, not guaranteed to work):
6:58 – What is firmware flashing?
7:51 – Find the correct “target” for your FC
9:35 – Before you flash! Back up your config! ALWAYS!
10:33 – What is DFU mode?
Download ImpulseRC Driver Fixer from:
13:34 – How and why to flash “unstable releases”
15:08 – Apply Custom Defaults. Don’t skip this step!
16:50 – Introducing the Setup Tab
17:21 – Version number and Target Name
17:50 – Status icons
18:37 – Sensor indicators
20:00 – Dataflash chip status (no dataflash chip found?)
20:57 – Enable Expert Mode
21:13 – Update Firmware and Connect/Disconnect Button
21:29 – Port Utilization, Packet Errors, I2C Errors, Cycle Time, CPU Load
23:18 – Calibrate Accelerometer button
24:11 – Calibrate Magnetometer button
How to calibrate the Magnetometer:
24:58 – Reset Settings button (this is misleading)
26:38 – Heading, Pitch, and Roll indicator
28:10 – Reset Z Axis button
28:44 – Info section of Setup tab
30:48 – GPS, Instruments, and Experimental Backup and Restore
31:10 – Next, we’ll look at the Ports tab
คำหลักของ Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1: [คำหลัก]
ข้อมูลเพิ่มเติมของ Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1:
ขณะนี้วิดีโอนี้มีจำนวนการดู 207507 วันที่สร้างวิดีโอคือ 2022-03-23 02:42:15 คุณสามารถดาวน์โหลดวิดีโอนี้ได้โดยไปที่ลิงก์นี้: https://www.youtubepp.com/watch?v=LkBWRiEGKTI , tag: #Betaflight #Install #Flash #Setup #Tab #COMPLETE #WALKTHROUGH #PART
ขอบคุณที่รับชมวิดีโอ: Betaflight 4.3 Install, Flash, Setup Tab | COMPLETE WALKTHROUGH PART 1